Sucker demon caught on video tangling sheets

A sucker demon, which looks identical to the one in Oliver Conceals a Sucker Demon, slithered in-and-out of my sheets and clothes yesterday, and is shown in a video, sling-shotting out from behind my makeshift pillow, after messing with my blankets, which similar to Demon Pulls, Shakes Pillow. In that video, a small, man-skeleton-like creature is shown on video yanking on my pillow as I try adjust it.

ALSO:
SEE on VIMEO

Small as these things might seem—particularly, considering the other demonic antics I've endured—they  have taken a huge toll on my health, not to mention the tax this has placed on my mind overall.

These two videos were only made about six months apart; but, every night since, I have been deprived of sleep in this way. As a consequence, I have aged 10 years in less than three.

This is not just a random consequence of the demons' actions—demons that can kill me at a moment's notice; rather, it is the specific intent. Not only do they announce this intent—as well as others—on a daily basis, they have a specific use for it.

Voices Demons use sucker demons to deform, bore holes in skull

Every night for at least 6 months, spider-like sucker demons have been 'biting' the same spot on the back of my head with a needle-like appendage that feels like it penetrates through the skin, as described in [blog]. They are a cross between the 'eye spiders' presented in [blog] and the snake-like sucker demons presented on this blog.

The Voices Demons order them to do this, and they claim that they are creating a hole in my brain, similar to a lobotomy or the holes left by certain kinds of illegal street drugs. They call it, "masturbating a hole in [my] 'noggin."

The effects are now visible on the surface of my scalp, where the skin is scabbed and burnt:

The drill site, which is surrounded by deformities in the topography of my skull

Sucker demons deform skeletal tissue when anchored to body

Sucker demons' frequent and prolonged anchoring to my skull caused deformities

Surrounding the location of the drill site, for lack of a better term, are deformities in the once-smooth topography of my skull, which were visible in less than six months time.

These are not the only abnormalities in my skull. Cartilage has been removed from my nose, nerves have been damaged or cut in my face, muscle tissue has been degraded in key areas on my face (apparently, these creatures break muscle down somehow—probably by cutting nerves), and holes have already been drilled in my eye sockets. Scars from surgical incisions—from surgeries I know nothing about—can be found inside my noise, mouth and eye sockets.

They have also, just to be themselves (or, "make a point"), removed a childhood dog-bite scar from around my mouth, replaced it with a different looking one, and then put it back again, multiple times.

Once, they told me to look in the mirror; when I did, had hair one minute, but not the next. Nearly six years later, I found out that the hairs were individual sucker demons.

TIP | Blending Quicktime Video Layers to Penetrate Demon Cloaks

NOTE | This post is unfinished, but should provide enough information for even a novice to use effectively. Check back for updates.

SEE ALSO | Read Blending Quicktime video layers perfect contrast in low-light environments for tips on brightening videos shot in near-darkness without altering its realism.

The same video-filtering technique used in law enforcement surveillance cameras can be employed for the purposes of capturing hard-to-see demonic activity using Quicktime layer blending.

Capturing demons on camera is a near impossible challenge to overcome due, in part, to their physical attributes and abilities and other characteristics which they use to avoid such detection. There are several factors that make it almost impossible to capture on camera what you can see with your own eyes. These are three of those factors that the video technique discussed in this post helps to circumvent:

• Speed. Some demons move quickly, particularly the smaller variety, some of which actually move into a different time flow when they move (this is part-and-parcel to their cloaking ability). In Demonic Peep-Eye, a small (uncloaked) demon can be seen running lightning fast up to a small hole drilled in a lid, mounted over the lens of my camera. After peeping inside, he speeds off at a rate so fast that only a few frames capture his image. If it hadn't been for its curiosity, I am sure I would never know this demon exists.
• Camouflage. Demons can blend (or camouflage) with almost any object that even remotely resembles, from any angle, a part of their body, their clothing, or overall body shape. In Blanket demon blends face with bedspread, the blanket demon superimposes a semi-transparent version of his face over a ruffled bedspread, which had been slowly molded into various features of his face; in Spectre of Death blends with shadow and window shade, the Spectre of Death blends the white features of his head with the white window shades, and his black cloak with the shadow underneath. For a full discussion of demonic blending, read Demon camouflaging illustrated in Chico o Vieja.
• Transparency and darkness. Demons almost invariably appear in the dark—at least the ones that I have met—and are usually cloaked (or semi-transparent), as well. In Sucker Demon, Cloaked (below), a sucker demon slinks down the back of my head and neck in a partially cloaked state. You can barely see it in the unfiltered video; but, with the technique described in this post, you can see it quite readily.

Change the Graphics Mode property to notPatXor of the original video layer

Add a new layer below the original and change its Blending Mode property to blend

NOTE | Set the Transparency property of each layer to 100%.

Sometimes, this technique also reveals demons that are blending with other objects, as shown below:

A demon of the white-masked, black-cloaked variety blends seamlessly with my hand and cellphone—while it's moving

The original (unfiltered) still frame

The above example is not just a coincidence, as the demon appears in every single frame my hand and cellphone does (view left-to-right, top-to-bottom):

Now that a hidden demon has been found, a variety of demon can be labeled because there is an existing photo of an identical-looking demon:

The demon in this photograph was compared to the one above,
resulting in a determination that these two demons are of the same variety.

The video's distinct rendering of the demon's features clearly define it as the variety of demon, above, in they both wear black cloaks, stand about 3 to 4.5" feet high, and wear garish white masks.

Before, with just the one photo, it could not be determined whether the lone demon was unique among all other demons, or whether it was one among many. Now, it could be that there are only two; but, based on my experience, similarly dressed demons that are the same shape and size generally are many. (If, however, the demon isn't dressed in something ceremonial or formal or uniform-like—and you haven't seen any others like it before—then it is probably one of kind).

NOTE | It is possible that the white masks are actually faces.

In the meantime, you can view the movie file to which the cloak-penetrating technique was applied; and, here's a couple of photos of both the original and post-processed movie and screen shots of the Quicktime video layer and blending mode settings, as applied in MetaHoot, a metadata property editor for Quicktime movies (available for Mac OS X only).

DOWNLOAD | Apple ProApps Quicktime Codex v1.0.1 and unpkg

Transfer Modes [Source: MacTech | The journal of Apple technology] The term transfer mode may be considered as a generic term encompassing three different transfer mode types. Each has to do with the way source pixels interact with destination pixels during drawing, painting, erasing, filling, and copying operations. The three types of transfer mode are as follows: Boolean Pattern Mode. Boolean pattern modes apply to line drawing, framing, painting, erasing, and filling operations.  Boolean Source Mode. Boolean source modes apply to text drawing and copying operations.  Arithmetic Source Mode. Arithmetic source modes apply to drawing (including text drawing), painting, and copying operations.

Boolean Source Modes The Boolean source modes are the equivalent in text drawing and copying to the Boolean pattern mode used for non-text drawing, painting, filling, and erasing operations. The relevant constants are srcCopy, srcOr, srcXor, srcBic, notSrcCopy, notSrcOr, notSrcXor, and notSrcBic. The additional non-standard mode grayishTextOr is useful for drawing text in deactivated or disabled user interface objects. (This mode is considered non-standard because it is not stored in pictures and printing with it is undefined.)

srcCopy

If the source is black, apply the foreground color to the destination; if the source is white, apply the background color; otherwise apply weighted portions of the foreground and background colors.

srcOr

If the source is black, apply the foreground color to the destination; if the source is white, do nothing; otherwise apply weighted portions of the foreground color.

srcXor

If the source is black, invert the destination (this operation is undefined for a colored destination). Otherwise, do nothing.

srcBic

If the source is black, apply the background color to the destination. If the source is white, do nothing. Otherwise, apply weighted portions of the background color.

notSrcCopy

If the source is white, apply the foreground color to the destination; if the source is black, apply the background color; otherwise apply weighted portions of the foreground and background colors.

notSrcOr

If the source is white, apply the foreground color to the destination; if the source is black, do nothing; otherwise apply weighted portions of the foreground color.

notSrcXor

If the source is white, invert the destination (this operation is undefined for a colored destination pixel). Otherwise, do nothing.

notSrcBic

If the source is white, apply the background color to the destination. If the source is black, do nothing. Otherwise, apply weighted portions of the background color.

Boolean Pattern Modes Pattern modes may be set as pen transfer modes in the graphics port using the PenMode function. The modes are represented by eight constants, each of which relates to a specific Boolean operation (COPY, OR, XOR, and BIC (for bit clear)) and their inverse variants. The effects of these modes are best explained assuming a 1-bit (black-and-white) environment in which the foreground colour is black and the background colour is white. The following lists the pattern modes and describes the effect of source pixels on destination pixels in such an environment. Pattern Mode Action On Destination Pixel If source pixel is black If source pixel is white patCopy Apply foreground colour. Apply background colour. patOr Apply foreground colour. Leave alone. patXor Invert. Leave alone. patBic Apply background colour. Leave alone. notPatCopy Apply background colour. Apply foreground colour. notPatOr Leave alone. Force black. notPatXor Leave alone. Invert. notPatBic Leave alone. Apply background colour. These effects are illustrated at Fig 4. Note particularly that patCopy causes the destination pixels to be completely over-written. patCopy is the transfer mode initially set in the graphics port.

Text dimming

grayishTextOr

Dim the destination. If in color, replace it with a blend of the foreground and background; if black-and-white, replace it with dithered black and white. This mode is used primarily for text.

Highlighting

Highlighting

hilite

Replace the background color with the highlight color.

hilitetransfermode

Replace the background color with the highlight color.

Arithmetic Source Modes Arithmetic source modes may be set in the graphics port, and may be passed as parameters in QuickDraw functions for copying pixel images. Arithmetic source modes perform arithmetic operations on the values of the red, green and blue components of the source and destination pixels. Because they work with RGB colours rather than colour table indexes, arithmetic transfer modes produce predictable results on indexed devices. The arithmetic source modes and their effects in a colour environment are as follows: Constant Value Description blend 32 Destination pixel is replaced with a blend of the source and destination pixel colours. Revert to srcCopy mode if the destination is a bitmap or 1-bit pixel image. addPin 33 Destination pixel is replaced with the sum of the source and destination pixel colours up to a maximum allowable value. Revert to srcBic mode if the destination is a bitmap or 1-bit pixel image. addOver 34 Destination pixel is replaced with the sum of the source and destination pixel colours, but if the value of the red, green or blue component exceeds 65,536, then subtract 65,536 from that value. Revert to srcXor mode if the destination is a bitmap or 1-bit pixel image. subPin 35 Destination pixel is replaced with the difference of the source and destination pixel colours, but not less than a minimum allowable value. Revert to srcOr mode if the destination is a bitmap or 1-bit pixel image. transparent 36 Source and destination pixel are replaced with the source pixel if the source pixel is not equal to the background colour. addMax 37 Destination pixel is replaced with the colour containing the greater saturation of each of the RGB components of the source and destination pixels. Revert to srcBic mode if the destination is a bitmap or 1-bit pixel image. subOver 38 Destination pixel is replaced with the difference of the source and destination pixel colours, but if the value of the red, green or blue is less than 0, add the negative result to 65,536. Revert to srcXor mode if the destination is a bitmap or 1-bit pixel image. adMin 39 Destination pixel is replaced with the colour containing the lesser saturation of each of the RGB components of the source and destination pixels. Revert to srcOr mode if the destination is a bitmap or 1-bit pixel image.

Add Dithering to Transfer Modes

ditherCopy

Replace the destination with a dither mix of the source and destination.

Transparent mode

transparent

Replace the destination with the source if the source is not equal to the background. 

Nature of the Demon Cloak Revealed

A demon's cloak is always partially visible to varying degrees, and how well a demon can cloak is determined by two factors: the variety of demonic entity they belong to and their individual capabilities, such as size and mental acuity. For example:

• The larger a demon is, the easier it is to see, no matter what variety it is (however, it may still be relatively undetectable, due to each varieties' ability to cloak); and,
• If a demon is caught off-guard or is evading a fast-moving camera, the visibility of their cloak is greater due to the distraction caused by a shift in focus from cloaking to evading.

The latter suggests that cloaking is initiated and maintained in the mind. Another factor that suggests that a cloak is a biological function in nature is that the cloak of each demon variety looks different.

Here's a list of demonic entities, followed by the appearance of their cloaks:

• The white-masked demons in black cloaks (as well a particular variety of the human-looking demons) are almost completely invisible, but can be seen when the light reflecting off of them is bent (or filtered) before it reaches your eyes or a camera. Since that only happens when they (and/or you) are in fast motion, a camera—and not the eye—is the only way to see one of these when cloaked; and, even then, you have to know where they are and where they're headed. In other words, it's a once-in-a-lifetime thing that you catch an image of one.

This image was captured when I accidentally took a picture while walking fast and carrying a camera at the same time

A demon's arm is shown in a still frame from a video in fast motion, reaching for me from around a corner in my home

• The Jawa-looking demons in black cloaks of the glowing-eyes variety, and the kind that wear the garish white masks, are completely invisible, except for their blur of motion, unless you capture them with a camera medium that is sensitive to the type of radiation they emit; and, because they move so fast, only fast-motion photography—or a photo at just the right moment (see below)—can hope to capture them. Even still, I was able to capture one still frame of this type of demon, while cloaked and in motion; like all other demons emitting radiation, it looks cartoonish (or over saturated in color:

• The similar-looking—but otherwise very different—white-masked variety of this demon can also  be completely invisible, except for a very faint, blue-tinted aura that looks more like an afterimage left in your vision during and after staring at something bright for too long.
• In Sucker Demon Sent to Punish Caught on Video, a cloaked sucker demon snakes around my head and then oozes down my neck as I try to capture it with my camera. It looks like all sucker demon's cloak, which looks like a faint, white, cloudy aura.
  
  NOTE | A special filter-processing technique was used in this video to highlight the cloaked demon, and was also used to highlight another demon in the still frame below; this technique is shown in Blending Quicktime Video Layers to Penetrate Demon Cloaks.
  
  

  

  Fast-motion on the part of the subject and my camera, as well as video-filter post-processing, revealed this cloaked demon in a still frame

Precautions indicate awareness of vulnerability, limits of cloak
The fact that virtually no demon can become completely invisible in every situation may be why darkness and black clothing are preferable for travel and other activities; specifically, that preference suggests that they are aware of the limits of their cloak, and that these two precautions are taken due to vulnerability to injury or death (of course, nighttime and black clothing go hand-in-hand with evil activity, too). Also, if cloaking requires concentration of effort, darkness affords them less mental strain.

Cloaks can enhance, diminish vulnerability in combat
But, even if they do have a soft-spot to protect, they have no issues with self-confidence, which, by the way, is nothing like bravery, but more like confidence through anger. Still, when fighting, some use their cloak in the approach—not only to launch a surprise attack, but to cause panic in their adversary. Specifically, they will show themselves, aggressively postured, just long enough to convey their deadly intentions; then, using their telepathy, they then cloak themselves the instant you become aware of your perilous circumstance, known that losing sight of a deadly enemy in combat would cause anyone alarm.

This is more of a compensation, though, for the limits the concentration required to maintain a cloak imposes on a demon's ability to fight effectively.

The role of light in penetrating a cloak
Examining the role of light plays is necessary in order to devise ways to penetrate a cloak (i.e., seeing it with your eyes or camera); but, you must first determine the source of the light you see. There are three possible sources:

1. The cloak is transforming the light that filters through it—that means that you are seeing some light reflecting off the demon;
2. The cloak is emitting its own light—that means it is comprised of other types of radiation or energy, which could be detected with specialized equipment; or,
3. Both of these—that means you can get a clearer picture by way of more available light and radiation data.

NOTE | You will know if a cloak is emitting light if you can also see it in the dark; but, if it appears diminished in brightness (but is otherwise still visible), then you know it both reflects and emits light. 

Knowing this helps in the detection and visualization of cloaked demons, which may lead to other observations and data needed to develop defenses against physical demonic attack, although, the only way to avoid falling prey to the Devil's schemes is to "hear and obey." [Luke 11:28]

More later...

Sucker demon sent to punish caught on video

Yesterday, I captured a large, cloaked sucker demon slithering down the back of my neck, in order to avoid being caught on camera:

ALSO:
DOWNLOAD from DROPBOX
SEE on VIMEO

It was sent to burn my head and left eye by the Voices Demons as punishment for not listening: doing things I need to do (such as laundry, grocery shopping, cooking and eating), things I have to do (legal work), things I want to do (hobbyist design and coding), reminiscing about the past, holding hope for the future, and expressing happiness for things present. In general, gratitude is verboten, too, but only if I am grateful for something big. (The Voices Demons just said that "it's not that you're grateful, it's that something good happened to you.")

I knew it was coming because one of the Voices Demons said that I "needed a whipping with the belt" for refusing to listen to their babbling. (This peculiar choice of words in threatening me is explained in Demons Mock Childhood Abuse Prior to Committing Acts of Violence.)

Upon hearing this, I immediately grabbed my laptop and pointed its camera at my head. That usually causes them pause; however, not this time.

Instead, the sucker demon swirled around my head, trying to duck the camera; but, not only was he too large to hide, he wasn't fully cloaked, and so was somewhat visible to the camera.

Other injuries since '06

In addition to burning my left eye, as discussed in Demons Burn Left Eye as Previously Threatened, the demons and their human counterparts have inflicted several other injuries lately.

Prior to the demons' involvement in my life, I never had any serious injuries of any kind, let alone from violence; however, since 2006, however, when the demons first announced their arrival (for the second time since age 5), I've had three broken bones, four lacerations, and once was electrocuted, just to name a few.

And, what's even more disturbing than going from no serious injuries to so many—over 30 in less than 5 years, to be exact—is that most of them were sustained by violent demonic acts.

Following are a few of the injuries sustained by and through various incidences of violence within the past several months (the Taser prong photos are from 2008):

Due to the close proximity of the officer, the Taser prong he deployed embedded itself in my rib

The rib in which the Taser prong was embedded both broke and shattered

After breaking my rib—twice—while simultaneously electrocuting me, a police officer twisted my arm behind my back until a shoulder bone snapped

A blood-draining site of a sucker demon, one of the safest and easiest to access on a sleeping body

A minor scratch from the sudden withdraw of a needle-like appendage, which was applied to my neck by a demon, after having placed a hand over the intended injection site

My fingernails, torn up and with bruises underneath, from having had to rip apart snake-sized sucker demons that invade my bed every night

A bruise under the thumbnail, and a wound opened by a sucker demon to make it more painful, incurred after four straight of hours of fighting these bedtime creatures; the exhaustion is plain on my face

A minor head and cheek scrape incurred when the Voices Demons pushed my head into a  steel easement outside in two separate incidences that day, which marked the first act of overt violence that has continued every day since

Cuts to the scalp, from the piercing appendage of sucker and spider demons, and from a demon pushing my head into a sharp object inexplicably mounted on the window pane

These injuries are in addition to those not shown here, and those that are virtually undetectable until they have accumulated to something that can be detected. This includes, but is not limited to, multiple poisonings and frequent penetration into bone, muscle tissue and nerves by the needle-like appendages of various entities.

It is unknown if the electric-like shocks that emanate from demons, which I experience frequently, have any cumulative or adverse effects; it is also unknown whether touching any given demonic entity is harmful in any way. When I touch eye spider-variants, in order to remove them from me or my bed or clothes, they feel like fuzz that pushes back a little. When they are torn or crushed, they make a popping or cracking sound. Only dust is left behind; but, unlike dust I know, this dust evaporates. You can feel it between your fingers for a few seconds, but then it feels just a little wet before disappearing.

There are also overwhelmingly powerful smells that precede and accompany certain demons. I've had breathing problems and dizziness with it before. It makes me tired, too; but, I'm not sure if that means it's harming me or not. I do know that there are many people in San Jose who spend considerable time with these demons that do not necessarily consider them an enemy. That, of course, does not mean a demon is being mindful of the effect its presence has on such persons, though.

Coming Up: Video Tip: Revealing demons in the dark using blending properties of Quicktime movie layers

GANG-STALKING | Gang-stalkers warned of upcoming violence, death by demons

As far back as 2006, the gang-stalkers warned and threatened me about future violence and death on an ongoing basis, even while they deconstructed my life. All the while that they took every asset I had, which included my house, my car, my savings, my credit, my reputation, my career, my health, and my family and friends, they eluded to people who intended to hurt me, incarcerate me, and, eventually, kill me.

Now that I have experienced all but death at the hands of those they eluded to—the demons and their human followers—I more clearly understand what their role was: they knew I was going to die, and they wanted my stuff while they could still get their hands on it, and to get away with doing so, too.

And, that is exactly what happened. They took my stuff, and the demons have (and continue to) stymy every effort I make at obtaining recourse, whether I've tried to obtain it through civil or criminal means.

Clearly, these people were never my friends, but nor were they the worst enemy I could ever face. I know that now. But, at the time, it appeared that the macabre interest in the Devil's plaything, i.e., me, would be the death of me (read Night of the Gun Chase to see how they actually tried to be the death of me).

I recorded many conversations between me and some of the gangstalkers, and the gangstalkers among themselves, talking about what was going on in 2006, and the future problem.

Warnings recorded on audio

The single most telling recording has already been posted in Secret Recording Reveals Demonic Agenda, in which two discuss what they were being told by demons and/or their human followers, in regards to what they were to do, and, if needed justification beyond money (Danny mulled over the lies told to them by the demons; Bobby said, "I don't give a shit about all that stuff; I just want my money, bro.").

Produced in 2007, a compilation of excerpts from conversations recorded in 2006 was created (below), and was intended to introduce my vast collection of those recorded conversations to a given audience at that time:

Self-predicting future violence and death

I also predicted future violence and death, and had plenty to complain about, injury-wise, even back then. In this series of audio snippets, you can hear me describing to others what consequences I have faced and will face at the hands of these demon collaborators. At the end, you hear one of them laughing at the pain he and others have caused:

NOTE | The remainder of this blog has been deleted by persons unknown, although likely the persons I speak of here; however, I will restore it from backups, time permitting.

Serious injuries mounting fast

In addition to burning my left eye, as discussed in Demons Burn Left Eye as Previously Threatened, the demons and their human counterparts have inflicted several other injuries lately.

Prior to the demons' involvement in my life, I never had any serious injuries of any kind, let alone from violence; however, since 2006, however, when the demons first announced their arrival (for the second time since age 5), I've had three broken bones, four lacerations, and once was electrocuted, just to name a few.

And, what's even more disturbing than going from no serious injuries to so many—over 30 in less than 5 years, to be exact—is that most of them were sustained by violent demonic acts.

Following are a few of the injuries sustained by and through various incidences of violence within the past several months (the Taser prong photos are from 2008):

A blood-draining site of a sucker demon, one of the safest and easiest to access on a sleeping body

Due to the close proximity of the officer, the Taser prong he deployed embedded itself in my rib

The rib in which the Taser prong was embedded both broke and shattered

After breaking my rib—twice—while simultaneously electrocuting me, a police officer twisted my arm behind my back until a shoulder bone snapped

A minor scratch from the sudden withdraw of a needle-like appendage, which was applied to my neck by a demon, after having placed a hand over the intended injection site

My fingernails, torn up and with bruises underneath, from having had to rip apart snake-sized sucker demons that invade my bed every night

A bruise under the thumbnail, and a wound opened by a sucker demon to make it more painful, incurred after four straight of hours of fighting these bedtime creatures; the exhaustion is plain on my face

A minor head and cheek scrape incurred when the Voices Demons pushed my head into a  steel easement outside in two separate incidences that day, which marked the first act of overt violence that has continued every day since

Cuts to the scalp, from the piercing appendage of sucker and spider demons, and from a demon pushing my head into a sharp object inexplicably mounted on the window pane