VID | Demonic Lightning Bug

Update on January 7th, 2017
I performed a few edits on the first still frame shown in this post (below)—mostly sharpening, with some tweaks to the levels of a desaturated copy, which I applied as a luminosity-adjustment layer to the original. The result was an increased understanding of the entities intent, which you can now see embedded in my forearm, close to my elbow:

Enhancements to this still frame shows the entity embedding itself into my arm—not just landing on top of it

I can't say for sure what it was doing; but, based on images showing deposits of cloaked metal, shaped like this bug and many other perfectly symmetrical shapes (wheeled spokes, etc.), it is probably depositing something either on me or in me.

The original post (unfinished)
A video made just tonight shows what looks like—at first—a ball of light launching straight out of my back, swirling around my head, and then slowly landing on my arm; at the end, a close-up reveals the solid form of a demonic entity I now dub a demonic lightning bug:

Details otherwise blurred by the entity's rapid flight were revealed in still frames showing its comparatively slower traversal on the back of my arm (near my elbow)

The entity was mistaken for a ball of light as it buzzed around me; however, on closer inspection, a solid entity was discovered, whose shiny, metallic carapace had caught a glint from the nearby light

I slowed playback of the video during the part in which the entity lands on my arm to enable others to see it in detail; without having done so, it would be easy to assume that the entity was nothing more than a lens flare caused by the camera's proximity to the light fixture nearby. That portion of the video showing the entity in flight plays at normal speed, as recognition of this fast-flyer would be impossible to ascertain through the motion-blurred streak he leaves in his wake.





The glow suggests the use of a less-evolved cloak than that of higher-order demons, which they can use to achieve the perfect balance between sufficient weightlessness for flight and a minimal permeability for motility (paddling through the air with their legs), but cannot render themselves completely invisible (at least not to a digital camera). The presence of that particular molecular property is not expressed by sight (the entity is still visible), but when the entity is positioned between a camera and light source, and the light reflecting from the entity creates a halo effect similar to a lens flare.

Still frames from the video showing the entity as it collides head-on with my back, sinking underneath the skin

This is a good guess, in that it is known that a change in state to all the three primary [most advantageous, noticeable] properties of molecules must occur to achieve a cloak; however, the degree of expression of the quality of the molecules per changes in each can (and nearly always do) vary by their degree of strength. Variations are mostly unique among species, while each variation is inherently common among members. Alterations to the actual and relative strengths of each property appear possible, the degree to which likely depending on the ability of the individual member, and its species' inherent limitations.

NOTE | I have only witnessed increases or decreases in the property expressing molecular visibility, having neither a way to ascertain variations in weightlessness by sight and without demonstration nor having knowledge of variations in the degree of strength expressed by the property governing the flow rate of time relative to the other two.

Only one species is known for their ability to express these three properties to their (theoretical) fullest extent (the near-perfect cloak), namely, the Jawa-lookalike demons. Unlike among members of all other species, none of this species' members vary or otherwise alter the naturally occurring maximums-strength expression of each property. Whereas the possible reasons for this are many, but the facts necessary to reliably ascertain those applicable are few, the complications of a species-wide policy of defensive and offensive superiority afforded by a cloak inherent to only its members...

***  MY NOTES BELOW - DISREGARD ***

...complicates or precludes interaction with less-capable or non-cloaking species, they must find ways to accommodate any differences...

Dreamweaver demons are a close second; however, the lowered timelessness required to interact with the dreams of non-cloaked species (i.e., humans) seems to cost greater visibility. Still, that's not what makes it second, but rather the fact that such demons don't use their ability to achieve near-perfection, but can. Jawa-lookalike demons, their interaction with the cloaking-disabled on their level rare as it is, prefer to bring such unfortunates into sync with their native flow rate of time [see assault in apartment post].

For example, centurion demons cloak for semi-invisibility and total permeability while maintaining sync with the flow rate of time native to us. Th usually because they want the protected interaction with non-cloaking entities afforded them by invisibility and permeability, but want to share a mutual flow rate of time as such interaction requires. Dreamweaver demons are a close second; however, the lowered timelessness required to interact with the dreams of non-cloaked species (i.e., humans) seems to cost greater visibility.]

Only one species is known for their ability to express these three properties to their (theoretical) fullest extent that is the near-perfect cloak that it maintains as a matter of course, namely, the Jawa-lookalike demons. Dreamweaver demons are a close second; however, the lowered timelessness required to interact with the dreams of non-cloaked species (i.e., humans) seems to cost greater visibility. Still, that's not what makes it second, but rather the fact that such demons don't use their ability to achieve near-perfection, but can. Jawa-lookalike demons, their interaction with the cloaking-disabled on their level rare as it is, prefer to bring such unfortunates into sync with their native flow rate of time [see assault in apartment pos.

*** rework in-progress above***

This is the second video capturing this particular entity. The first video contained only five or six still frames of the entity, which collectively showed it crawling out of a hole in naturally cloaked molecules of my face (a consequence of the impact of a demonic weapon), and then climbing up to my forehead before sinking underneath my skin again. At the time, I guessed it biomechanical, not crossed between a beetle and a ladybug as it is:

A still frame from the video that first yielded a glimpse of what I call a demonic lightning bug, which shows the entity on my right eyebrow

PICS | Orlock features resurface sans moving camera

As demonstrated dozens of times on this blog, most demonic activity that can't be seen by human eyes unaided can be captured by shooting digital video of a possessed subject (usually a person) during a period of high demonic activity while the camera and/or the subject is moving (even though this causes blurriness), and then skimming the video frame-by-frame, examining each one for demons and the like.

Images acquired using this technique were posted most recently to GALLERY | New demon faces, weapons. Although the non-demonic elements in the frame are blurred by the motion of either the camera or the subject, the demonic elements are quite clear. The reason has to do with the differences between the light reflected from non-cloaked and cloaked matter. The light from non-cloaked (or visible-to-the-naked-eye) matter is dense, and, when a camera or subject is in-motion, a higher concentration of light is swept across the camera sensor, which causes smearing (or a motion blur) and a brighter and more saturated than normal rendering of the in-motion subject. Because so little light is reflected from cloaked (invisible) matter, the higher concentration of light garnered by motion simply makes the otherwise invisible subject visible—at least to the camera—yet not so much as to cause smearing, etc.

Another method is to filter light from any non-cloaked matter (turning the lights down, for example), so that it doesn't overwhelm the light from cloaked matter. Again, you must use a digital camera equipped with a CCD or CMOS camera sensor to render the light from the cloaked matter visible; however, no motion is required. This is due to the type of light reflected from non-cloaked and cloaked matter; light rays typically reflect from non-cloaked matter, while light from cloaked matter is emanated by polarization [see SCIENCE | The ethereal glow and semi-transparency of cloaked demons explained; see also Nature of the Demon Cloak Revealed]. Although polarized light may look weak at first, in that it will not be visible in digital media without special processing, its unique properties enable it to register with camera sensors, albeit outside of the human-visible range. The relatively simple task of bringing polarized light into visible range is easily accomplished using most off-the-shelf image-processing apps, including Photoshop and GIMP, a task that cannot be accomplished with reflected (or natural) light too dim to register with the sensor. Images processed by this technique are shown Enhancing demon faces made anywhere, at anytime, from anything:

Using this technique, a little blue demon standing in complete darkness—unseen in the original video—was made visible in GIMP

VIDEO | Human hands and forearms disappear, reappear as demonic demonstrates that, if conditions are just right, that not only is no special processing is required, but elements of both techniques can be used in the same media. In that post, a video shows my forearms and hands temporarily and briefly disappearing, then replaced by a demonic derivative before returning to normal again. It is the polarized light emanated by the cloaked body parts that enabled detection by the camera sensor, and it was the naturally low-light conditions at night that prevented natural light from overwhelming it; the concentrating effect of light passing through the holes in the window screen between me and the camera brought that light into the human-visible spectrum:

The coincidental, naturally occurring combination of conditions, usually required by either of the two techniques described in this post. inadvertently revealed a brief transformation of my forearms and hands from human to demon and back again without any post-processing

Surprisingly, this new video reveals demonic activity sans either of the above techniques, showing what I call my orlock ears up-close, in full light, and without any blurring to any of the other elements in the frame—very much unlike past videos showing them. For whatever reason, my pointy, half-ear replacements appear in nearly all 14-minutes of its duration, having required neither dim lighting nor motion by either the camera or subject (i.e., me) to be seen:

Four still frames showing my orlock ear at different angles (top, second rows); two still frames showing my ear in mid-transformation between my orlock and human ears (third row); an image of my human ear for comparison 

Although seeing this transformation with my own eyes is a rare occurrence, I don't think it is as rare for people in San Jose, where I live. I'm not sure how it's done or exactly by whom or which feature is transformed or what kind of demonic activity surrounds me per the will of the Voices Demons and related ilk, which is done for the purposes of tagging, the means by which targets are identified to persons who may be unfamiliar with them and, regardless, also the means by which they are solicited to perpetrate acts of violence against the target, perhaps by using the demonic weapons supplied to them [see VIDEO/PICS | Demonic "bombs" define territory and confinement areas; see also Sucker demon-possessed shoestrings attack legs on verbal command].